What's hot in the home furnishing industry?The smart home, of course;So what's hot in the smart home space?The first thing that comes to mind for a lot of people is certainly a smart lock.And the ferment of intelligent lock, with the ferment that intelligent household is limited to the concept to go up to have essential different, because intelligent lock already went through the stage that concept hypes, and going into ordinary people's home.All say that smart lock is expensive, so we should pay more attention to the usual maintenance, but 95% of smart lock users do not know how to properly maintain their own locks.

　　With the popularity of fingerprint lock, fingerprint lock users are more and more, relative to the southern coastal city fingerprint lock high penetration rate, high publicity rate is different, the northwest region of fingerprint lock daily maintenance information circulation is less, the following Xiaobian will tell you how to maintain their own fingerprint lock.

　　1, in daily life, to ensure that the fingerprint lock clean and tidy.Check the technical status of the lock body regularly. When collecting and entering fingerprints, the finger strength is moderate, and do not apply strong pressure. The mirror cloth can be used to wipe the dirt of the fingerprint collection window, because after a long time of use, there will be dirt on the surface, which may affect the normal use.Do not use wet rag or clean the smart lock with a clean ball, it is easy to damage the surface of the smart lock electroplating.Self-test every 3-6 months on average, timely treatment of abnormalities found, tightening and adjustment of loose and maladjusted parts, and preventive change of some vulnerable parts.

　　2. Add lubricating oil.Lock core as a fingerprint lock the most important mechanical structure, naturally can not ignore the maintenance.It is found that the lock core is not too active or can not adhere to the accurate position, then it should be noted that the lock core should be lubricated with oil. The oil gun should spray oil to the lock core, and not excessive. Roll the handle and knob until the door lock is activated to stop.When used for a long time, the smart lock is not flexible to open the door, the handle can not bounce back to the horizontal position, the mechanical key is not flexible to open the door, and so on. It also needs to add some lubricating oil to the door lock.

　　3, battery replacement.When the smart lock encounters low battery power, it will be notified at least two weeks in advance. Please replace the battery in time to avoid affecting the normal use.If it cannot be opened due to lack of power, you can use the emergency charger or use the emergency key to open the lock.

　　4, the handle does not hang things.Please do not hang heavy objects on the handle. It is better not to hang anything on the handle, so as to avoid long-term pressure on the handle and damage the balance of the handle.Although the lock body is waterproof, please try to avoid contact with or immerse it in water or other liquids.If the shell comes into contact with liquid or salt spray, wipe it dry with a soft, absorbent cloth.The mirror cloth can also be used to wipe the dirt of the fingerprint collection window, because after a long time of use, there will be dirt on the surface, which may affect the normal use.

　　5. Do not let the locking surface contact with corrosive substances.While lock security is the first priority, it is also important to look at the lock.So do not let the lock surface and corrosive material contact oh, it will destroy the lock surface protective layer, affect the gloss of the lock surface or cause surface coating oxidation.

　　Only in the process of use to give the correct maintenance to effectively ensure the effect of the smart fingerprint lock and extend its service life, so the enterprise operators, technicians and users must carry out the correct maintenance of the smart fingerprint lock.

Disclaimer: the above article only represents the author's own views, copyright belongs to the original author all.Reprint is only for knowledge sharing, if there is infringement, contact immediately delete, about the content of the work, copyright or other issues, please contact the site Xiaobian after the content is published in a timely manner.